Armchair Racer, Slot Cars, Scalextric, Ninco, Fly, Carrera

SLOT.IT LIGHTING KITS & SSD CHIP
	SISP06 - NOW USE SISP16 1 x COMPLETE Lighting Kit with Brakes (SISP10 + SISP11)
	SISP10 1 x Lighting Kit Base module (needs SISP11)	$16
	SISP11 1 x Lighting Kit - 2 white front + 2 rear red lights module (needs SISP10)	$12
	SISP16 1 x Universal Lighting Kit for Analogue and SSD Slot.it cars	$18
SCALEXTRIC SPORTS DIGITAL UPGRADE PCB
	SISP12 1 x Scalextric SSD upgrade PCB	$27
	SISP13 1 x Lighting Kit for Scalextric SISP12 SSD PCB	$18
HAND CONTROLLERS
The SCP-1 is contact less, friction free, with linear magnetic trigger position readout and features an interchangeable module system, to connect to either Analogue (+) or Analogue (-) or Digital systems. All three types are now available. Most Analogue commercial and club tracks are positively wired (Common Ground) so you will need the SCP01A controller were your home set tracks like Scalextric, Ninco, Carrera and SCX are negatively wired (Common Positive) so you will need the SCP01F & SICP01C. The Digital Module and Hand controller are both avail;able and are supplied with all cabling for the four available commercial brands, Ninco, Carrera, Hornby SSD Scalextric and Tecnitoys SCX.
	SISCP1 Electronic Controller The SISCP-1 is contact less, friction free, with linear magnetic trigger position readout and features an interchangeable module system, to connect to either Analogue (+) or Analogue (-) or Digital systems. At this stage the SI SPC-1 is supplied for use only with (+) Positive Wired Analogue Tack Systems. Most commercial and club tracks are positively wired.	$159
	SISCP01D ELECTRONIC DIGITAL Hand Controller to suit Scalextric SSD, SCX, Carrera & Ninco Digital slot car systems. Universal cables supplied for above digital systems	$159
HAND CONTROLLERS PARTS
	SISCP01F 1 x Controller without Cartridge	$99
	SISCP01B 1 x Analogue Common Ground Cartridge for POSITIVE WIRED TRACKS	$69
	SISCP01C NEGATIVE WIRED CARTRIDGE Common Positive Terminated with a stereo 3.5mm male plug , to suit Scalextric & Ninco Adaptors required for use with SCX and Carrera	$69
	SISCP01E ELECTRONIC DIGITAL CARTRIDGE to suit Scalextric SSD, SCX, Carrera & Ninco Digital slot car systems. Universal cables supplied for above digital systems	$79
	SISCP01G DUE AUGUST 2009 HIGH CURRENT 30 amps POSITIVE WIRED CARTRIDGE Common Ground	$TBA
	SISCP04B 1 x Silicon cable with banana plugs	$20
	SISCP04A 1 x Complete Trigger Set	$16
	SISCP04C 5 x Replacement fuse for SISCP-1- 3. 15A - fast	$5
	SISCP04D 1 x Replacement retriggerable fuse for SISCP-1 - 1,35A	$5
	SISCP02A 1 x Complete Red Shell	$25
	SISCP02B 1 x Complete Blue Shell	$25
	SISCP02C 1 x Complete Yellow Shell	$25
	SISCP02D 1 x Complete Smoke Shell	$25
	SISCP03A 1 x Set Hand Controller Red plastic parts	$9
	SISCP03B 1 x Set Hand Controller Blue plastic parts	$9
	SISCP03C 1 x Set Hand Controller Yellow plastic parts	$9