2 CAR SET + 1 |
3 CAR SET |
4 CAR SET |
|
ACCESSORIES |
 |
|
|
|
|
IN STOCK SPECIAL |
OUT OF STOCK |
IN STOCK |
|
|
| SCALEXTRIC
DIGITAL SLOT CAR SETS |
The launch of the Digital range has marked a new
age for Scalextric with Multi-Car Racing and Lane Changing.
Get ready for an altogether new Scalextric experience and some
great action-packed racing. Using the latest advanced digital
technology, up to four cars can now race at any one time. The
cars can change lanes, overtake and perform pitstops, making races
even closer than ever. Scalextric Digital gives fans a wide range
of choice with a series of sets, stunning digital models and accessories.
The Digital range gives fans a more exhilarating and life-like
racing experience. Up to four cars can now move into the inner
or outer lanes at the touch of a button on the hand throttles
to take them past their track rivals. Just like the real thing,
cars can now use blocking tactics to slow other cars down by switching
lanes. A new brake button on the top of the hand throttle gives
the added advantage at the start line and superior control around
corners.
The ‘Race Ready’ sets mean that you can simply plug in, play and get involved in all the great racing action that Scalextric Digital has to offer. If you want to create your own bespoke track you can buy a variety of additional track pieces to make your circuit as varied and as challenging as possible. Scalextric offers additional lane changing tracks for straights and bends and even pit lane tracks to create a more realistic type of circuit.
The Digital range also offers a wide choice of authentic looking
digital cars including F1, Rally, GT and Road cars. And for fans
wanting to convert their existing analogue models to digital,
Scalextric offers two types of digital conversion chips; for single
seater and saloon cars.
Further accessories such as the Digital Lap Counter makes sure
there’s no confusion over the result! Scalextric Digital
is designed to give fans a truly life-like racing experience where
tactics and strategy are vital for success.
|
C7040
DIGITAL CONVERSION KIT - Cars and digital chips are NOT INCLUDED in this KIT |
This kit allows you to convert your Scalextric analogue layout to Scalextric digital for the most realistic slot racing experience.
This incredable Scalextric digital conversion kit allows you to race up to 4 cars on just one lane, with the opoortunity to preform amazing, realistic overtaking andbraking manoevers.
Switch lanes for overtaking and blocking
Race up to 4 cars on one lane
Compatable with existing Scalextric track
U
ltra responsive hand throttles, with dynamic and button braking
CONTENTS
1 x POWERBASE
2 x HAND CONTROLLERS
1 x STRAIGHT LANE CHANGE TRACK
1 x FULL STRAIGHT TRACK
1 x 1/2 STRAIGHT TRACK
1 x TRANSFORMER |
 |
$185 |
Cars and digital conversion chips are not included |
| C1186
DIGITAL IGNITION SET
Running length 5.3m - Area required 2.2m x 0.9m
SPECIAL OFFER - PURCHASE C1186 FOR $299 and recieve one ADDITIONAL CAR AND HAND CONTROLLER TURNING THIS SET INTO A 3 CAR DIGITAL SLOT CAR SET for under $300 |
 |
C1186 IN STOCK NOW

 |
$299
while
stocks
last
|
|
The 3rd digital car will either be C2649D Renault F1 or C2707D A1 GP Team France or the C2735D AUDI TT. Stocks are limited |
C1197
DIGITAL DRIVER - 2 CAR SET
Running length 4.18 m Area required 1.8m x 0.9m |
 |
C1197 SOLD OUT
|
$299 |
Set includes two BMW Mini Cooper cars. |
C1201
DIGITAL SUPER GT - 3 CAR SET
Running length 6.76m Area required 2.8m x 1.4m |
 |
C1201
MORE DUEJUNE 2008

|
$499 |
| Set includes One Porsche 911 GT3R, one Dodge Viper and one Aston Martin DBR9 cars. |
C1202
DIGITAL SUPER GT - 4 CAR SET INCLUDING C7039 LAP COUNTER
Running length 6.76m Area required 2.8m x 1.4m |
 |
C1202
IN STOCK NOW

|
$649 |
Set includes 4 x F1 cars:
Ferrari No6 Massa,
Renault, ING No.3,
Honda, No7, Earth livery, Jensen Button and
Vodafone McLaren, No2 of Lewis Hamilton. |
LAP COUNTER |
DIGITAL CHIPS |
PIT LANE |
CHANGE OVER |
CONTROLLERS |
 |
|
|
 |
|
|
|
|
|
|
C7039
DIGITAL LAP COUNTER
|
|
C7039
Scalextric Digital (SSD)
Lap Counter, giving you your lap count and position, a must have
accessory where lane changing make it very hard to keep track of
one's lap count.
|
$110 |
C8515
DIGITAL EASY FIT PLUG
|
|
C8515
IN STOCK NOW
The conversion process is simple:
1/ Remove the plate on the car chassis by undoing the retaining screw and disconnect the braid-to-motor wiring plug.
2/ Connect the EASYFIT DIGITAL PLUG to the braid-to-motor wiring plug.
3/ Replace the screw to secure the EASYFIT DIGITAL PLUG to the chassis.
|
$25 |
|
EASYFIT DIGITAL PLUG
A range of cars produced from 2007 onwards will have as standard a socket on the car where the EASYFIT DIGITAL PLUG is connected to convert the standard car in to a car
suitable for use on a SCALEXTRIC DIGITAL layout.
The conversion only requires a small screw-driver and takes less than sixty seconds to perform |
|
|
FEATURES:
‘Digital Plug Ready’ underpan (DPR) allows quick-change of the digital chip in less than 60 seconds. Easy access. ‘Plug an Go’ solution.
One C8515 EASYFIT DIGITAL PLUG can be transferred and used on as many cars as necessary.
No need for a soldering iron or modeling expertise
|
|
|
Cars built to the new DPR standard for 2007 include: Ferrari F430, Lamborghini Gallardo, Range Rover, Chaparral, Audi R10, Porsche Spyder LMP2, Ford Mustang FR 500C.
Note: When converting a car without a DPR chassis refer to Digital Chips C7005 and C7006 |
|
|
C7036 STRAIGHT LANE CHANGEOVER
|
|
C7036
STRAIGHT LANE CHANGEOVER
|
$79
|
C7007 OUT to INSIDE LEFT HAND INCLUDING SENSOR TRACK
|
|

|
$58 |
C7008 OUT to INSIDE RIGHT HAND INCLUDING SENSOR TRACK
|
|

|
$58 |
C7009 INSIDE to OUT LEFT HAND INCLUDING SENSOR TRACK
|
|

|
$58 |
C7010 INSIDE to OUT RIGHT HAND INCLUDING SENSOR TRACK
|
|

|
$58 |
C7010 IN to OUT RIGHT HAND
|
|
C7012 RED AUDI TT & H/CONTROLLER
C7013 SILVER AUDI TT & HAND CONTROLLER
Colours may varie from time to time
|
$58 |
C7010 IN to OUT RIGHT HAND
|
|
C7002 DIGITAL HAND CONTROLLER
|
$25 |
| C8328
TRACK DESIGNER SOFTWARE |
 |
C8328 - TRACK DESIGNER SOFTWARE
Design and build up to 8 lane Scalextric circuits
from all of the existing range of Scalextric Sport, Classic, Digital
and Sport World track pieces. Includes 3D track building and an
animated auto-drive feature allows you to drive around any track
you design. An Inventory database allows the user to print off the
exact part requirements for any designed circuit.
Recommended: Windows XP, Pentium IV 1.5GHz,
256 RAM, 700 MB free disk space.
|
$TBA
Due
back
in
Jan
2008
|
|